* Click on the product item from the list below to view its description.

ADAPTORS
CLINOMETERS
RECOVERY TAPS
CHUCK JAWS
REMOVABLE SAFETY CLEVIS
BALL TYPE PULLING DOG (MONKEY)
HOISTING PLUGS
CARBIDE PIPE WRENCHES
CASING DRIVE SHOES
CARBIDE CASING SHOES

All Ruden adaptors are made from 4140 material or better. Available thread combinations are listed and other threads are available on request.

ROD THREADS	WIRELINE THREADS	CASING THREADS	A.P.I. THREADS	INTERNAL FLUSH THREADS	MAYHUE THREADS
RW, XRT	A-WL	EW	2 3/8"	2"	2"
E, EW	B-WL	AW	2 7/8"	2 3/8"	2 3/8"
A, AW	N-WL	BW	3 1/2"	2 7/8"	PIPE THREADS
N, BW	H-WL	NW	4 1/2"	3 1/2"	NPT THREADS
N, NW	P-WL	NW	5 1/2"	4 1/2"
H, HW		PW	6 5/8"	5 1/2"
			7 5/8"

Clinometers thread on the innertube and are used to measure the drill hole inclination.

WIRELINE SIZES:
BTW
NTW
B-WL
N-WL
N2-WL
H-WL

Casing and rod taps are used to recover broken or unscrewed casing and pipe below the collar of the hole. Wireline and casing taps can be ordered with standard wireline box threads so there is no need to use an adaptor or can be ordered with any box thread as required.

SIZES:

CASING TAPS	WIRELINE TAPS	ROD TAPS
AW	A-WL	XRT
BW	B-WL	EW
NW	N-WL	AW
HW	H-WL	BW
HWT	P-WL	NW
PWT	BTW	HW
	NTW	NWJ

Send us your used jaws and Ruden will refurbish and retip to original specifications.

CHUCK TYPES:
12HH
B-20
J.K.S. 300
LONGYEAR

Most sizes in casing and rods available.

This type of clevis features a locking pin which completely eliminates the hazards encountered when using an open hook. The clevis can easily be removed from the cable to facilitate threading, either through the sheave wheel when hoisting rods or through the guide rollers when moving the drill.

SIZES:
3/4 inch
5/8 inch
1/2 inch

The ball tupe pulling dog eliminates the need of a hoisting plug for certain drilling operations. This device permits faster hoisting and easier handling of the drill string. Ideal for one man operation, the ball type pulling dog is strongly recommended when drilling both vertical and angle holes.

ROD SIZES	WIRELINE SIZES	CASING SIZES
XRT	A-WL	BW
EW	B-WL	NW
AW	BTW
	N-WL
	NTW
	H-WL

A hoisting plug is a swivel connection used to connect the hoisting cable to the drill rod string. A standard rod box thread in the hoisting plug body takes various sizes of reducing couplings and enables one hoisting plug to be used with different sizes of rods. Ruden offers three different sizes. All hoist plugs are load tested.

CAPACITY:
AW Hoist Plug c/w AW Rod Box - 5000 LBS.
Medium Hoisting Plug c/w NW Rod Box - 15,000 LBS.
BNH Hoist Plug c/w NW Rod Box - 25,000 LBS.

Carbide pipe wrenches are used on heat treated rods for better gripping force and will last much longer than conventional wrenches. Send us your old hooks and heels and Ruden will install new carbide grippers for you.

The casing drive shoe is threaded on to the lower end of the casing string to facilitate the driving of the casing through overburden.

CASING SIZES:
BW
NW
HW
HWT
PW
PWT

Tungsten carbide coring bits, casing shoes, and rod shoes are used for drilling into overburden, gravel, soils, and other soft soils. They can be ordered in standard sizes, custom sizes, or heavy duty sizes.